Transporters

Pet carriers for small companion animals

A carrier creates a separate space for an animal while it is being moved or transported. It can be used for veterinary visits, car journeys, travel by bus or train and other situations in which a pet needs to be carried outside the home.

The category contains products intended primarily for cats, small dogs, rabbits, ferrets, guinea pigs and other small pets. Each model has its own dimensions, construction and, where specified, maximum load. Suitability should therefore be assessed using the exact product specification and the animal’s measurements.

Fabric pet carrier bags

Soft carrier bags feature hand straps, while selected variants also include an adjustable shoulder strap. Mesh panels and ventilation openings support airflow and allow the animal to see part of its surroundings.

Depending on the model, the bags may include zipped entrances, an additional metal fastening, feet underneath the base and pockets for small accessories. Some variants fold down for more convenient storage when they are not in use.

Carriers with multiple entrances

Selected fabric bags have three access points: two at the sides and one at the front. This can make it easier to place an animal inside, particularly when it is reluctant to enter through a single opening.

The front entrance on certain models is secured with both a zip and an additional metal fastening. All openings must be checked before the bag is lifted, as an incompletely closed zip may allow the animal to escape.

44 cm fabric carriers

The range includes soft carriers measuring approximately 44 × 25.5 × 26 cm. A removable base insert measuring about 40 × 22.5 cm helps make routine cleaning easier.

These models have three entrances, ventilated sections, an internal clip, hand straps and an adjustable shoulder strap. The front entrance measures approximately 24.5 × 20.5 cm. Buyers should consider the available internal space as well as the outside dimensions.

49 cm fabric carriers

Larger bags in the assortment measure approximately 49 × 29 × 32 cm. The removable insert is about 46.5 × 25.5 cm, while the front entrance measures approximately 29.5 × 27 cm.

The design includes three zipped entrances, a shoulder strap, carrying handles, ventilated panels, feet underneath the bag and an internal attachment clip. The material of the selected variant is described as water-resistant, but this should not be interpreted as a guarantee that the complete bag and its zips are fully waterproof.

Compact handheld carriers

The category also includes smaller handheld bags measuring approximately 41 × 23 × 27 cm. They feature a double zip, ventilated grilles, a viewing panel, carrying handles, an accessory pocket and a removable insert measuring approximately 32 × 19.5 cm.

The foldable construction can be useful for customers with limited storage space. Retail listings should nevertheless include the exact measurements, because a product described as universal will not necessarily accommodate every animal.

Ventilated pet carrier backpacks

Backpack carriers distribute the load across the user’s shoulders and leave both hands available. Models with viewing windows and mesh panels provide airflow and allow the pet to observe its surroundings.

One ventilated backpack measures approximately 37 × 32 × 28 cm and has adjustable shoulder straps, double zips, two side pockets and a removable 31 × 25 cm insert. Its stated maximum load is 10 kg.

Weight capacity is only one selection criterion. The animal must also fit within the available length and height and be able to maintain a stable position.

Front-worn pet carriers

The range also contains soft carriers designed to be worn against the front of the user’s body. This position allows the animal to be observed while being carried, while mesh sections help maintain airflow.

The smaller model is approximately 40 cm high and 24 cm wide, has an opening about 10–12 cm in diameter and supports a stated load of up to 2 kg. The larger version is approximately 48 cm high and 29 cm wide, has a similarly sized opening and supports up to 3 kg.

The opening must fit securely so the animal cannot slip out or become trapped. A pet should remain under constant supervision while using this type of carrier.

Rigid plastic pet carriers

Rigid models combine a plastic shell with a metal door, ventilation openings and a top carrying handle. Their enclosed structure provides more stable walls than a soft bag.

The variants shown in the category measure approximately 48 × 32 × 30 cm. The door can be installed to open from either the left or the right. The carriers are available in several colours and are intended for cats, small dogs, rabbits, ferrets and guinea pigs.

Before use, the owner should inspect the connection between the upper and lower shell, the installation of the door and the condition of the handle. A carrier with a cracked body or faulty closure should not be used.

Foldable in-car pet carriers and seats

The category includes foldable products combining the functions of a pet carrier, an in-car seat and a temporary travel pen. One model measures approximately 40 × 30 × 22 cm and features adjustable seat attachments, carrying handles, an accessory pocket and a 25–40 cm adjustable tether.

This type of product can create a designated place for a pet inside the vehicle. It should not automatically be treated as a crash-tested restraint system unless this is expressly confirmed in the documentation for the particular model.

Choosing the correct carrier size

The animal’s body length, height and widest point should be measured before purchase. Its weight must also be checked whenever the product has a stated load limit.

A conventional bag or rigid carrier should provide enough space for the animal to stand steadily, lie down and adjust its position. A carrier that is too small restricts movement, while excessive free space can reduce stability as the product is carried.

For retailers, exact measurements provide more useful purchasing guidance than recommendations based only on species or breed.

Ventilation during travel

Air holes, grilles and mesh panels support air exchange inside the carrier. They must not be covered by clothing, luggage or other objects. A carrier should not be placed next to a source of heat or left inside a warm vehicle.

Even a well-ventilated product requires supervision. The animal should be monitored for signs of overheating, severe distress or breathing difficulty throughout the journey.

Internal attachment clips

Many soft bags and backpacks include a short internal clip designed to help secure the animal. Unless the product instructions state otherwise, it should preferably be attached to a properly fitted harness. Connecting it only to a collar may place dangerous pressure on the neck if the animal moves suddenly.

The tether must not be long enough to allow entanglement or escape through an open entrance. It also does not replace securely closing the carrier.

Introducing a pet to its carrier

Before the first journey, the carrier can be left open in a calm area so the animal can explore it voluntarily. A removable insert or familiar piece of material may help the pet become accustomed to the space, provided it does not block ventilation or create an entanglement risk.

Initial carrying sessions should be brief. Gradual familiarisation may reduce stress, although every animal responds differently and must be observed individually.

Cleaning and product inspection

Removable inserts make it easier to clean the base of a fabric carrier. Soft materials should be cleaned according to the care guidance for the particular model and allowed to dry completely. Plastic carriers can be cleaned after disassembly, with particular attention paid to corners and the area around the door.

Before each use, inspect:

• handles and shoulder straps,
• zip operation,
• mesh-panel attachments,
• the internal clip,
• shell connections and doors,
• the product for cracks, worn areas or loose stitching.

A damaged carrier should be withdrawn from use.

Wholesale pet carriers for retailers

The variety of designs enables B2B customers to offer handheld bags, shoulder carriers, backpacks, front-worn carriers, rigid crates and in-car products. Different sizes and colour variants can help retailers serve several customer groups.

Master-carton quantities shown within the category vary by model and include 10, 12, 20, 25, 30 and 75 units. Wholesale buyers should verify the quantity assigned to the exact product code, as similar-looking variants may be packed differently.

FAQ – najczęściej zadawane pytania

1. Which animals are these pet carriers intended for?
The category includes products for cats, small dogs, rabbits, ferrets, guinea pigs and other small companion animals. Suitability depends on the dimensions, construction and load limit of the particular carrier.

2. How should the correct carrier size be selected?
Compare the animal’s length, height, width and weight with the carrier’s usable space and stated load capacity. Species or breed alone is not an accurate sizing method.

3. What is the difference between a soft bag and a rigid carrier?
A soft bag is foldable and may have hand straps, a shoulder strap or backpack straps. A rigid carrier has a stable plastic shell, ventilation openings, a metal door and a carrying handle.

4. Do the backpack carriers have maximum weight limits?
Selected models have stated limits of up to 2 kg, 3 kg or 10 kg. The specification of the exact product should always be checked before purchase.

5. Are the carriers ventilated?
The products have ventilation holes, grilles or mesh panels that support airflow. These sections must remain unobstructed, and the animal should be supervised throughout transport.

6. What is the internal clip used for?
It helps limit the risk of the animal jumping out when the carrier is opened. Unless instructed otherwise, it is preferable to connect it to a correctly fitted harness rather than only to a collar.

7. Does an in-car pet seat replace a crash-tested restraint?
This should not be assumed unless the documentation for the exact product expressly confirms it. The carrier must be installed according to its instructions and relevant travel-safety requirements.

8. How should a pet carrier be cleaned?
Removable inserts and carrier surfaces should be cleaned according to the care guidance for their materials. Every component must be completely dry before the pet is placed inside again.

9. Which carrier types are useful for a pet shop assortment?
A varied selection can include fabric bags in several sizes, backpacks with different load limits, rigid plastic carriers and products intended for use in vehicles.

10. How many carriers are packed in a master carton?
The quantity depends on the model. The category includes cartons of 10, 12, 20, 25, 30 and 75 units, so buyers should check the figure shown for the exact product code.