Scratchers

Cat scratchers for activity and rest

Scratching is a natural feline behaviour. A suitable scratching product provides a dedicated surface where a cat can use its claws and stretch its body. Designs with platforms, hideaways and hanging toys also support climbing, play, observation and rest.

The available range includes:

• vertical scratching posts,
• horizontal corrugated cardboard scratchers,
• cardboard models supplied with catnip,
• triangular scratchers with hideaways and balls,
• multi-level cat trees,
• towers with platforms and resting areas,
• protective film for furniture.

The products differ significantly in size and function. A compact post or cardboard scratcher needs relatively little floor space, while a tall cat tree combines several features and requires a larger, carefully measured area.

Vertical scratching posts

A basic upright scratcher consists of a stable base and a vertical post wrapped in cord. This arrangement allows a cat to scratch while standing and extending its front legs.

One listed model features:

• an overall height of approximately 43 cm,
• a round base measuring approximately 30 cm in diameter,
• a cord-covered scratching post,
• a base finished with soft plush,
• a plush ball suspended on a string.

A compact post can fit into a smaller room or provide an additional scratching station in an area the cat already uses. Before allowing access, check that the base stands level and does not slide during scratching.

Corrugated cardboard scratchers with catnip

A horizontal scratcher made from layered corrugated cardboard allows the cat to scratch close to floor level. Its curved surface may also be used as a resting place.

The listed cardboard model measures approximately:

• 42.5 cm in length,
• 7 cm in width,
• 9 cm in height.

Catnip is included with the product. A small amount can be placed in the openings of the cardboard to encourage a cat that responds to its scent to investigate the scratcher. Reactions to catnip vary, so not every animal will show the same level of interest.

Cardboard naturally wears down with use. Remove loose pieces regularly and replace the scratcher when the surface becomes heavily damaged or unstable.

Triangular scratcher with a hideaway

The triangular model combines a scratching area with an enclosed space and a hanging ball. It measures approximately 44 × 42 × 26 cm, while the hideaway entrance is approximately 13.5 cm in diameter.

Check the entrance measurement before purchase. The cat should be able to move through the opening without squeezing. Do not place additional objects inside if they leave insufficient room for the animal.

The hanging ball and its string should be inspected regularly. Remove or repair the toy if the string becomes stretched, frayed or partly detached.

Multi-level cat trees and towers

Larger cat trees offer several levels for scratching, climbing, resting and observing the room. Depending on the selected model, the structure may include:

• vertical scratching posts,
• platforms at different heights,
• soft resting surfaces,
• enclosed hideaways,
• raised observation areas,
• a stabilising base.

The category includes cat trees measuring approximately 92, 111, 119, 127 and 138 cm in height. Check both the overall height and the base dimensions before ordering, leaving enough free space around the assembled product.

A taller tree provides more climbing options but requires careful assembly and stable placement. It must not rock or lean when the cat moves between levels.

Choosing the right cat scratcher

The choice depends on the cat’s scratching habits, body size and the space available in the home. Some cats favour upright surfaces, while others prefer to scratch horizontally. Providing both orientations can be useful when the animal’s preference is unclear.

Before ordering:

• observe whether the cat scratches vertically or horizontally,
• measure the intended location,
• compare the scratcher’s height with the cat’s size,
• check the base dimensions,
• review the number of platforms and hideaways,
• verify the size of every entrance,
• check the assembly requirements,
• identify the material used for scratching.

A broad base and stable construction are particularly important for larger or heavier cats. In a multi-cat home, consider the number of accessible platforms and resting areas.

Positioning a cat scratcher

Place the scratcher where the cat already spends time or attempts to scratch. Suitable locations may include a resting area, a room entrance, a space beside a sofa or a position that gives the cat a view of household activity.

The product should be:

• placed on a flat and stable floor,
• kept away from fireplaces and naked flames,
• positioned outside busy walkways,
• kept at a safe distance from stairs,
• arranged so that platforms do not strike the wall,
• kept clear of doors and exits.

Never place a tall cat tree on a table, cabinet or other raised surface. Use any additional securing system specified by the manufacturer.

Assembling and inspecting a cat tree

Multi-level scratchers are supplied as components for assembly. Follow the instructions included with the particular model and use every required connector.

During assembly:

1. lay out and count the components,
2. position the base on a flat surface,
3. install posts and platforms in the specified order,
4. tighten each connection,
5. test every level for movement,
6. inspect the completed structure before use.

Connections may loosen over time. If the tree begins to rock, stop the cat from using it and tighten the components before returning it to service.

Protective film for furniture

The category also contains transparent self-adhesive film designed to cover areas of furniture exposed to scratching. The listed product is supplied as a set of two pieces.

The film can be applied to selected sections of a sofa or another area the cat repeatedly targets. Compatibility between the adhesive and the furniture material should be checked before installation.

Test the film on a small, inconspicuous section first. The application surface should be clean, dry and smooth. Do not use the product on a material that may be damaged or discoloured when the film is removed.

Cat scratchers for wholesale resale

Cat scratchers are a core part of a retailer’s cat accessories range. Offering several construction types allows stores to serve customers looking for either a compact scratching surface or a larger activity tree with resting areas.

When sourcing products for resale, compare:

• the type of scratcher,
• scratching surface material,
• overall height and base measurements,
• the number of levels and hideaways,
• included toys,
• assembly requirements,
• package dimensions,
• units per bulk carton.

Compact posts, cardboard scratchers and triangular hideaways can be stocked alongside tall cat trees to cover different customer needs, home sizes and product applications.

FAQ – najczęściej zadawane pytania

1. What types of cat scratchers are included in this category?
The range includes upright posts with hanging balls, cardboard scratchers with catnip, triangular hideaways, multi-level cat trees and protective film for furniture.

2. Should I choose a vertical or horizontal scratcher?
Observe the cat’s existing behaviour. A cat that stretches against furniture may prefer a vertical post, while one that scratches carpets or floors may use a horizontal cardboard model more readily.

3. How tall are the available cat trees?
The category contains models measuring approximately 92, 111, 119, 127 and 138 cm in height. Check the individual product details for base dimensions and platform arrangements.

4. How can I check that a cat scratcher is safe to use?
The product should stand securely on a level surface without rocking. Inspect its connections, cord, cardboard, platforms and hanging toys regularly, and stop use if any component becomes damaged.